Image from metro
GANZ TECHNIK DESIGN SOLUTION is a structure of companies that do business in more than Seven years and employ over 25 people. The individual companies operate, in Three different area like of Padi & Ambattur . The Group is planning to expand to other Area in the future. In the individual area GT Group does business in industries such as Electronic Industries and Automobile Industries.
The factory has devoted its complete endeavor and energy in manufacturing and delivering quality special purpose machineries. It has improved in its quality and customers contacts by generating in its profitable measures
•Conveyor Length: 650 mm
•Skid Plate: Cold formed SS sheet
•Conveyor Width: 300 mm
•Structure: 60 x 30 Al Extrusion
•Indexing pitch: 35 mm
•Belt Speed: 20 m/min
•Max Product Weight: 15 Kg
•Control: Variable Frequency Drive
••Tape Width : 30mm
•Tapping pitch : 15mm
•Winding speed : 700rpm
•Max coil dia : 500mm
•Linear Momentum : 400mm
•Drive Type : Belt Driven
•Height : 2.5m
•Length : 2.4m
•Covering dia : 2.8m
•Shuttle dia : 1.1m
Fit for large glue outflow with big orifice, the discharge rate can be fine adjusted
•The fluid flow part uses an anticorrosive material
•Function of preventing liquid and suck back easy to install
•Applicable to single component glue, two component epoxy resin, polyurethane, silicon etc
•Double Column Press With additional double rod guide
•Pressing Coil in Inertia Ring Tray 720coils at a time.
•Each coil is precisely pressed using 5 spring loaded pins, arranged radially.
•Machine Dimensions : 800x300x420mm
•The Pneumatic powered jaws hold the end of coil wires and twist all strands together using a stepped motor.
•Gripping Force : 40N @5 bar
•Rated torque : 20Nm
•Rated speed : 150rpm
•Non corrosive outer body
•Ergonomic and aesthetic design
•Tool maximum dia :80mm
•To check the continuity in an electronic chip of size 2x1.5mm using pogo pins.
•Double linear bush guide assembly .
•Pneumatic cylinder controlled actuation.
•Damped with pneumatic shock absorber.
•Accurate and repeatable positioning of pogo pins.
•Two metallic wire brusher rolled close to each other strip the enamel form copper wire form a motor stator coil
•Stripping roller dia : 38mm
•Z axis Stroke : 100mm
•A axis stroke : 100mm
•R axis stroke : 115°
•Dimension : 1200x1070x2050mm
•Stepper controlled 3-axis polar co-ordinate.
•Plc controlled auto operation stripping at 6 different position.
•Belt driven for screw rod to motor
•Belt driven stripping machine
•Auto de-clamp once operation is completed.
•Ball screw actuator. Plc controlled auto operation once the part is clamped.
•Pneumatic powered gripper picks up the part ,invert the part and places it back on the pallet.
•Gripping force : 114N
•Gripper opening : 8mm
•Lifting stroke : 200mm
•Max Lifting load : 700N@6bar
•Flipping angle : 180°
•Dimension : 700x1070x2050mm
•Plc controlled ,fully automatic machine.
•Lm Rail block mounted grippers.
•Rack and pinion type flipping mechanism.
•Rigid ,fabricated steel frame.
•Taping the core bobbing coil using plc controlled servo.
•Max taping dia 40mm.
•No of taping spindle 1 nos.
•Taping speed 30pices per minute.
•Auto cutting of tape after taping.
•Magnetic catch for holding the bobbing coil.
•Plc controlled semi automatic operation cycle.
Bussiness Trade Name : Ganz Technik Design Solution
Address : Dr. Moorthy Nagar Padi Chennai
Nature Of Bussiness : SPM ,Automation & Jigs & Fixtures
Plant & Office Area : 1200 sq.ft / 1000 sq.ft
Date of Established : September 2011
Kind of Ownership : Proprietor
Contact Numbers : +919600206768
E-Mail : firstname.lastname@example.org
Image from metro